Инфракрасный инфракрасный фильтр Zomei 680 нм 720 нм 760 нм 850 нм 950 нм

See the pictures below for comparative shots with and without the use of this filter. The IR Filter we offer is double thread with 680nm, 720nm, 760nm, 850nm and 950nm(IR680 IR720 IR760 IR850 IR950) for Lens of 37mm, 43mm, 46mm, 52mm, 55mm, 58mm,62mm, 67mm, 72mm and 77mm in our shop. We recommend you to choose the suitable ones for your camera. Different IR filters have different effects. You can use the filter individually or in any combination to meet your demand.

950nm is suitable for outdoor and strong light use.

850nm is suitable for outdoor and strong light use.

760nm is suitable for indoor and weak light use.

720nm is suitable for indoor and weak light use.

680nm is suitable for indoor and weak shadows use.

Note:

Please set a custom white balance of your camera.The way to set different cameras may vary,please check your manual.

The exposure time is relatively long when using IR filters, a tripod is necessarily needed at this situation.We also suggest you to use a cable release in case shake happens.

Common problems of IR filters

Hotspots are a relatively common problem with infrared. It is due to internal reflection of light inside a lens. Normal lenses have coated barrels to absorb light, but these coatings don't always work in infrared, causing these problems.

Solution:

1.Hotspots can often be eliminated by changing the aperture.

2.Hotspots occur most often in the same type of shooting angles that cause lens flare. In this case, hotspots can usually be avoided by shooting away from bright sources of light.

Exposure:

On converted cameras, the exposure meters still work based on visible light. This can occasionally cause some under or over exposure because the visible and infrared light of a scene may not be the same.