Комплект кованых поршней и шатунов для Форда 2,3 л.

Zestaw do zakucia silnika

Przeznaczony do Ford 2.3 L. Ecoboost

Zestaw składa się:

Kute tłoki Diamond Pistons o rozmiarze 88.00 mm.

Specyfikacja tłoków:

• Bore Size: 88.00mm
• Over Size: 0.50
• Comp Ratio: 9.5:1
• Comp Height: 32.76mm
• Stroke: 94.00mm
• Rod: 149.25mm
• Wrist Pin Pn: 22.50mm
• Dome CCS: -6.41
• Head CCS: 46.00
• Ring Set: 21-GNH08800
• Piston Material: 2618
• Series: Diamond Series

Product Features and Design

• 2618 Low-silicon / High expansion alloy for High HP/Boost applications
• Round skirt design with bottom reinforcing band
• 3D under crown milling to ensure minimal weight without compromising strength.
• 3D milling on piston crowns for ready to install finish
• Over size valve pockets for larger than stock valves and clip cuts on the edge of the pistons
• Window milling, reduce piston overall weight while maintaining its strength and structural integrity
• Lateral gas ports for better ring seal
• Offset pins for quiet operation
• Molly Skirt coating for friction minimization and skirt wear protection
• Premium 8620 series pins from 1018 mild steel

Diamond Pistons

Diamond pistons are engineered with only one thing in mind: Winning races! They are manufactured in the USA from 2618 material. Diamond racing company is known from the late 60s to produce the highest quality engine parts around. The past 2 decades Diamond has solely dedicated itself to manufacturing forged pistons. With all state of the art machinery they offer customers the state of the industry in machining. The Coordinate Measuring Machine (CMM) is one of several sophisticated pieces of measuring and modeling apparatus used in Diamond’s engineering department. The CMM provides very accurate measurements, measuring the location and details of valve pockets, for example, to within a .0001in. This laser scanner is used for modeling purposes, especially for scanning piston domes where it scans thousands of surface points in minutes. Developing the highest quality pistons in the industry by using the latest CNC machinery and computer software aids, as well as providing unmatched quality control. With these credentials it was only a matter of time before we decide that this is the firm to work with for making unlimited horsepower!

Kute korbowody ZRP wykonane w projekcie I-Beam, wersja Heavy Duty

Specyfikacja korbowodów:

• Length: 149.25mm
• Pin Diam.: 22.50mm
• Housing Bore: 55.04mm
• B.E Width: 21.84mm
• Weight Gr.: 576
• Set of: 4
• Bolt Size: 3/8"
• Fastener Grade: ARP2000

The I-Beam “Heavy Duty” series Connecting rods for Ford 2.3L EcoBoost aimed for the High Hp/Boost applications. Built from the finest raw materials 4340 high tensile steel with a specially optimized shape for high performance and extreme durabilityThese feature “straight cut” pin end for increased durability, so they can only be used in conjunction with aftermarket pistons. The bushings are made from AMPCO 18 material, for excellent resistance to wear and fatigue and have radial groove acting as an oil reservoir. They are shot peened to relieve stress from the material and multi-stage heat treated to increase rigidity. The tight tolerances in the production process, ensure a perfect fitment while optimizing the oil clearances. Bend and twist is tightly controlled.Each rod includes ARP 2000 cap fasteners that are rated at 220,000psi