DRIVE_RDY Адаптер ПК-станции для AMIG

Witam na mojej aukcji,

Przedmiotem sprzedaży jest  DRIVE_RDY - ADAPTER DOWOLNEJ STACJI PC DLA AMIGI

po prostu podlacz  DOWOLNA STACJE od pieca i ciesz sie nia na amidze.

ps. oprócz takich, które maja złącze zasilania nad złączem tasmy.

Urządzenie, dzięki użyciu układów serii hc nie wymaga dodatkowego zasilania. Pracuje w trybie DD.   autorem jest twórca Furii, Boris Krizma. Wyprodukowane w Polsce przez smd.lotharek.pl / lotharek.pl

dla znajacych jezyk angielski, opis z mojej strony:

DriveRDY is a small flexi interface that generates the READY signal necessary for proper operation with Amiga. The interface makes any 3.5" PC drive work with the Amiga, just any PC drive selected for example from an old PC.

The adapter is designed so that the signal is exactly accurate, as it is present in Amiga drives. To achieve this result, Boris used reverse engineering to capture the logic level of the Chinon BZ-354 mechanics.

DriveRDY is equipped with CMOS logic gates 74HCxxx. Those ICss have a very low current consumption, so there is no need for an external power interface. The power supply simply uses signals from the floppy drive. So just insert the adapter between FDD and Amiga, see photo.Similar HW solutions already exist and can be bought on eBay. To my disappointment, they are copies of copies, from documentation freely published on the Internet, unfortunately not fully functional.

Adapter was tested on several FDD PCs (Nec, Sony, Epson, Teac, Samsung, Chinon, Panasonic, etc.), more than 40 floppy drives in total.

DISCLAIMER:

The adapter has one limitation, with some FDDs it is not possible to use the adapter because it overlaps the power supply of the floppy drive. Some drives have the power supply right above the flat data cable connector and the DriveRDY adapter covers this part. These are some mechanics like Alps or Mitsumi.