РЕГУЛЯТОР СКОРОСТИ ДВИГАТЕЛЯ 400Вт 220В

Characteristics:

This motor speed controller is suitable for AC220V 50 / 60HZ motor.

Speed control range 90-1400r / min 50HZ, 90-1700r / min 60HZ

Suitable for packaging, printing, food, electronics, instrumentation, medical equipment, garment industry production line for variable speed drive equipment

The controller uses high-quality electronics and integrated components to ensure durability.

It has small size, high precision, wide speed adjustment range and long service life.

Technical data:

• Power supply: AC220V 50 / 60hz
• Rated power: 400W
• Ambient temperature: -10 ~ 50 ℃;
• Relative humidity: <90%;
• Speed control range: 90-1400r / min 50HZ, 90-1700r / min 60HZ
• Weight: 295g

Wiring method:

Black wire is motor main wire, red and white wire is auxiliary capacitor wires, and 2 blue wires are speed control feedback wires, green wire is ground wire.

Package includes:

• 1 x speed controller

Directions for use:

1. Turn off the power, connect according to the wiring diagram and make sure the connection is correct.

2. Fix the controller firmly and set the speed to the lowest "0" to avoid sudden high current and permanent damage when starting the power;

3. Then turn on the power and set the speed dial to the desired position. Turn off the power when not needed;

4. The regulator is connected to the engine. If it is found that the torque or speed is not as required, adjust the tuning potentiometer on the side of the product

5. To change the motor's direction of operation, simply swap the "CCW" and "CW" jumper lines on the back of the controller.

6. Choose a short combination of COM and CW, the motor will rotate clockwise.

7. Choose the short combination of COM and CCW, then turn the motor counterclockwise.

(When changing direction, do not change direction until the motor stops completely. )

No-AGO-13244820903