Детектор угарного газа CO, ЖК-дисплей

Carbon monoxide detector and gas CO detector CO

Carbon monoxide and gas sensor with automatic sensor error diagnostics

1. The sensor is CE and ROHS certified.
2. UNIVERSAL model of carbon monoxide and gas detector with digital LCD display. System for alerting households to the detection of carbon monoxide (carbon monoxide) and gas.
3. The device constantly monitors the concentration of carbon monoxide and gas in the air. Exceeding the allowable measurement is signaled by a loud alarm siren, a red LED and a voice message.
4. Thanks to the latest device, which is equipped with an LCD display and an intelligent microprocessor, you can control the concentration of carbon monoxide and gas in the air on an ongoing basis.

Sources of gas leaks:

• Kitchens equipped with a gas stove.
• Boiler rooms with natural gas, propane or butane stoves.
• Rooms with gas appliances: cylinders, meters, gas lines.

1. LCD display (displays CO concentration in PPM, gas in%)
2. Sensor openings
3. Alarm siren loudspeaker
4. Alarm LED
5. Power LED
6. Diode informing about sensor malfunction
7. Test / Reset button

LEL - lower explosive limit - i.e. the lowest concentration of a flammable substance. LEL for methane = 50'000 PPM

High-quality low-voltage semiconductor / catalytic sensors were used in the construction of the detector.

The sensor has a Test / Reset button, which is used to check if the device is working properly. The condition of the device, batteries and internal circuits is constantly monitored.

The detector is powered by 230V current and a 9V battery. In the event of a power failure, the detector guarantees protection for up to several hours.

The sensor monitors the concentration of carbon monoxide and explosive gas in the air and, if detected, alerts the household to the danger.

The CARBON MONOXIDE AND GAS detector is equipped with low-voltage semiconductor / catalytic sensors, informs about the danger by activating a loud audible alarm, lighting a red LED and emitting an English voice prompt "Attention please, gas leaking".

The LCD display allows you to read the concentration of carbon monoxide and gas.

Technical specifications:

1. Sensor: semiconductor / catalytic sensors; detect carbon monoxide and combustible gas (such as liquefied petroleum gas (LPG), natural gas, methane, etc. )
2. Working temperature: 0 - 50 ° C
3. Air humidity: 10% -95% RH
4. Sensor sensitivity: 0-9999PPM
5. Alarm threshold for CO: from 100 to 999PPM ( /- 50PPM)
6. Gas alarm threshold: from 6% to 20% LEL * (from 3'000 PPM to 10'000 PPM; /- 1'500 PPM)
7. Alarm volume: 85 dB
8. Power supply: 230V / 50Hz and / or 9V rechargeable battery ( batteries not included )
9. LCD display: 5 modules (3 2)
10. Weight: 0.2 kg
11. Dimensions : 112 x 73 x 42mm