OPEN-SMART 2,4-дюймовый сенсорный TFT ЖК-экран с разрешением 320*240 пикселей

OPEN-SMART 2.4 inch 320*240 TFT Touch Screen LCD Touch Screen Breakout Board Module with Touch Pen for Arduino -- Features Note: If you want to place a bulk order, the stock is not enough, . For the touch screen, the area about 0.5cm from the edge of the sreen cannot be touched. This is a 2.4 inch TFT LCD expansion board. This display has a built-in controller with a RAM buffer so that almost all the work is done by the TFT. It outputs TFT pins, and the pin pitch is 2.54mm, so it is easy to unwind. With the GPRS module, you can design your own DIA phone. With the NFC reader module, you can create access control systems using photos. With a voltage and a current sensor, you can make an oscilloscope. - Can use it directly to display oacute;w characters, graphics and image oacute;w in BMP format by using the Micro SD card adapter module. - Compatibility: Since the logic level is 3.3V, it is compatible with the 3.3V logic level on the board, usually you need to add a level conversion circuit if you use for Arduino. - Touch screen type: Resistive touch screen. - Pi oacute;ro tactile: length is 9cm; - Resolution: 320*240, 16-bit (262,000) color - Display size: 2.4 inch; - Operating voltage: 3.3V; -Logic level: 3.3V; - Working current: maximum is 60mA - Bus interface: 8080 interface parallel (8 bit) - IO Port packet: PAD is available and the pin pitch is 2.54mm. - The LED pin can be connected to an external backlight control circuit to control the brightness of the backlight. You can connect it to GND to keep the backlight on all day. - Very suitable for digital photography frame, oscilloscope, generator function, monitor detection system Pictures Parts List ( Schematics and program can be sent, please ) 1 x Module 1 x Pi oacute;ro touch