Инструмент для снятия и установки Инструмент для удаления сердечника клапана

Brand Name: alloet

➤ Type: Hand Tool Parts

➤ Origin: Mainland China

➤ Model Number: Valve Core Remover Installer Tool

➤ is_customized: No

➤ Installer Tool: Tool Parts

➤ Air Conditioner: Valve Core Remover Installer Tool

R410A R22 Valve Core Remover Installer Tool Air Conditioner Repair Tool with Dual Size SAE 1/4 inch 5/16 inch Port for HVAC System

Feature:

1.For removing and installing spools in live systems. Quick and easy replacement of leaking spools. Dual size for R410a or R22 charging systems or other retrofit replacement systems.

2.Excellent Workmanship: The valve core remover installation tool is made of solid brass, which is durable and not easy to rust; the metal knob is designed with anti-slip knurling, which is durable and can be used for a long time.

3.Time-saving: Core tool, easy to insert the inner valve, control the core, no need to stop or release the refrigerant, easy to disassemble and install the valve core, save hours of emptying and charging time.

Specification:

Items: Spool Removal Tool, R410a Spool Removal Tool, R22 Spool Removal Tool, a/c Spool Removal Tool, HVAC Valves, Spool Removal Tool, Schrader Spool Removal Tool, Pressurized Small Split System Refrigeration Air conditioning service.

Service Ports: 1/4 inch and 5/16 inch Female SAE Thread

Bypass Port: 1/4 inch Male SAE Thread

Color: Yellow

Material: Copper

Packing size: about 180*115*30mm/7.09*4.53*1.18 inch

Basic operation of valve core removal wrench:

1. Pull out the dead point on the valve stem, close the valve on the tool, adjust the connection between the tool and the air conditioner interface, and tighten the valve on the air conditioner.

2. Make sure the tool is tightly connected to the air conditioner valve, then open the valve on the tool. Push the valve stem into the A/C valve and gently turn the rear knob of the remover. Find the angle at which the spool is attached and release it.

3. After removing the valve core, pull out the valve stem, close the valve on the disassembler, loosen the screw at the end of the tool, and take out the valve core. Job done!

Note:

It is recommended to close the spool wrench valve and disconnect the internal connection of the air conditioner before removing the spool.

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

1*Spool Remover Installer

1*Spool Remover

10*Spool