Биметаллическая кольцевая пила 5,9 дюйма, 150 мм, профессиональный резак для сверл из нержавеющей стали

About this item 【Construction Grade】- 5.9" Hole Saw is made of HSS M42 & high speed steel, impact resistance, wear resistance. With higher hardness, higher toughness and stronger resistance. Well made, sharp, hard, lasting. Comes with drill bit hardware. 【Clean Edge Design】- 150mm Hole Saw with the non-binding clean edge design. This hole saw cuts smooth and easy, which is ideal for soft wood, plastic plate, plater board and thin PVC board. 【Perfect Cutting】- 25mm (0.98") cutting depth, 10mm (0.39") shank diameter, 150mm (5.9") round holes in iron, aluminum plate, alloy plate, plastic sheet, aluminum plate with no binding or rough edges. 【Versatile Use】- The Hole Saw is suitable for 3-5mm soft metal thickness material. Widely used in drywall, insulation, sheetrock, outer board and siding. Hole saw for LED lights. Cuts easy and accurate size. Perfect for the job needed. 【Warm Reminder】- To successfully cut 1/4-inch steel plate with this hole saw (or any hole saw) without damaging the hole saw, you must turn it slow, keep it cool and lubricated and apply slow, steady downward pressure. Workers should wear corresponding protective equipment. Product Description

Hole saw is made of HSS high speed steel, with extremely sharp cutter, low consumption and durable with impact resistance, wear resistance.High precision, smooth cutting and high hardness.Openings for iron, aluminum, and various types of pipes. Hardened, heat resistant, positive rake HSS teeth with alloy backing. Worked great for kitchen range hood vent.Hole saw is perfect for Installing Locks, Knobs in Doors and Cabinets in Seconds, Easy drilling on glass and all types of metals.Hole saw works with the ordinary electric drill and is ideal for drilling large diameter holes through Wood, Aluminum Plate, Alloy Plate, Plastic Sheet etc.

The Hole Saw cuts holes through wood, plywood, plastic, drywall, soft plaster, acrylic-board and thin metal. In addition to cutting holes for can lights or recessed lights, it also comes in handy for home projects when working on air ducts, ceiling lights, speakers and more.

Put the hole opener into the electric drill before use and confirm that it is firmly clamped before it can work.Maintain a vertical angle to the workpiece during operation. After the hole opener drills through the workpiece, exit the workpiece while keeping the hole opener rotating.When working continuously, use coolant or water to cool the cutting edge.Workers should wear corresponding protective equipment when working to protect them from working safely,and apply rust oil after use to extend the service life.

High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade.

PLEASE NOTE

1. When cutting metal materials, it is necessary to add coolant throughout the process.

2. When cutting continuously, please choose a lower speed.

3. If there is any abnormality or unsatisfactory chip removal during operation, you need to stop the work, pour out the chips and continue to work.

4. The larger the hole, the harder the material, the slower the speed.

5. For processing thickness of more than 10mm, you need to remove the spring on the positioning drill.

6. The power of electric drill should be more than 750W, and the use of impact drill is prohibited.

Warm Reminder

This product has some paint peeling phenomenon. This is a normal phenomenon and does not affect the normal use of the product. If there are any problems with the product, keep in touch.