СОЛНЕЧНЫЙ РЕГУЛЯТОР MPPT 30А ЗАРЯДКИ 12/24В

Functions:

Automatic identification system voltage, 12 / 24V automatic recognition.

Humanized LCD display and two-button operation of human-machine interface.

The technical data for configuration and modification has been supplemented.

Intelligent 3-stage MPPT charging mode with high efficiency.

Load control mode can be selected, timer function can be reset in case of street lighting at night.

Discharge efficiency control.

Discharge counter in ampere hours.

• Working storage function: record the total system working time, record the error times during operation, record the times of full battery charge.
• Reliable overvoltage protection, short circuit protection, overload protection, overcharge protection, over discharge protection.
• Accurate temperature compensation, automatic correction of charging and discharging voltage, improving battery life.
• Round inverted protection.
• Solar panels, battery, positive poles of solar charge controller are connected together, adopting negative MOSFET in the series control circuit.

Technical data:

• Current: 30A,
• Rated voltage: 12/24 V.
• USB output: 2.4A * 2
• Over charge current (V): 13.7V / * 2 24V.
• Over discharge current (V): 10.5-11V / * 2 24V.
• Temperature compensation: -3mv / ℃ / cell
• Empty Waste Load:

Package list:

• 1 * Solar charge controller
• 1 * English user manual

Remarks:

1. The task of the controller is to protect the overvoltage and overvoltage.

2. When the battery voltage is too low, the controller stops the output power; after charging the solar panel, the cell returns to 12.6 V.

3. 12.6V is the recovery discharge voltage.

4. Normal driver voltage is between 10.7V and 13.7V. These two voltage fluctuations can be set manually.

If you have problems using it, try adjusting the float voltage to 13.7V:

First, you need to press the MCU control button for about 3-4 seconds, then the screen will show the management interface.

Second, you need to press the add button on the screen until the voltage reaches 13.7V.

Finally, press the MCU control button again, which will save the controller record data when the display is not flashing.

Please be aware of:

This product does not support cash on delivery, we will send it after you pay, thank you for your understanding.