Wiha SB 255-14 Volt Detector 90-1000V voltage test

Saves time Fast voltage testing through non-contact measurement. Increases your efficiency Thanks to the internationally adapted measuring tip, it can be used for all sockets worldwide. Application For detecting and locating live conductors, cable interruptions and breaks, blown fuses, defective lamps on light chains as well as individual strand detection. Standards CAT IV 1,000 V Before starting an electrical installation, electricians must ensure that the working environment is voltage-free. In order to test alternating electrical fields or to locate suspected sources of error, a voltage tester is required. An initial indication of whether there is no voltage is possible with the non-contact Wiha voltage tester thanks to an optical signal. After switching on, the permanently green LED indicates that it is operational. If there is voltage, the red LED lights up, which is easy to read even in daylight. Two AAA batteries are required for use, which are included in the scope of delivery. Thanks to its handy size, the voltage tester with clip fits comfortably in any shirt or trouser pocket. Thanks to the internationally adapted measuring tip, the voltage tester is suitable for all socket variants worldwide. The single-pole voltage tester is subject to the EN 61010-1 and IEC 61326 standard and is designed for CAT IV 1,000 VAC. For electrical applications Before and after each use, the voltage tester must be tested on a known voltage source to ensure functionality. EN 61010-1 IEC 61326 IP67