Wiha SB 255-13 Вольт-детектор 12-1000 В, тест напряжения

Saves time Fast voltage testing through non-contact measurement. Increases your efficiency Thanks to the internationally adapted measuring tip, it can be used for all sockets worldwide. Increases your efficiency Integrated bright LED flashlight. Increases your flexibility Voltage tester covers a large voltage range from 12 to 1,000 V AC. Application For detecting and locating live conductors, cable interruptions and breaks, blown fuses, defective lamps on light chains as well as individual strand detection. Standards CAT IV 1,000 VAC Before starting an electrical installation, electricians must ensure that the working environment is voltage-free. In order to test alternating electrical fields or to locate suspected sources of error, a voltage tester is required. An initial indication of whether there is no voltage is possible with the non-contact Wiha voltage tester thanks to optical and acoustic signals. After switching on, the permanently green LED indicates that it is operational. When testing the voltage, depending on the strength of the alternating electrical field, the LEDs light up from weak blue to orange to strong red. Two AAA batteries are required for use, which are included in the scope of delivery. If the device is not used for 4 minutes, it switches off automatically to save energy. An integrated LED flashlight enables measuring point illumination in dark environments and can be used as a flashlight by manually switching it on and off. Thanks to its handy size, the voltage tester with clip fits comfortably in any shirt or trouser pocket. Thanks to the internationally adapted measuring tip, the voltage tester is suitable for all socket variants worldwide. The single-pole voltage tester is subject to the EN 61010-1 IEC 61326 standard and is designed for CAT IV 1,000 VAC. For electrical applications Before and after each use, the voltage tester must be tested on a known voltage source to ensure functionality. EN 61010-1 IEC 61326 IP67