Аксессуары для 3D-принтеров 17HS8401S Шаговый двигатель постоянного тока 3 В с кабелем двигателя AC600

Features: 1. The speed is even and does not lose steps. 2. The PCB board is reinforced to the motor, and the unique stator technology is adopted to ensure that the stator teeth of the motor are evenly polished, the inner hole has high precision, and the rotation speed is stable and accurate during the working process. 3. The structure is stable and works smoothly. 4. The surface of the rotor of the motor is coated with imported epoxy resin to prevent the motor from generating noise due to burrs on the surface of the carbon steel after oxidative grinding. 5. The speed is stable and the noise is low. 6. The motor has high stability, high speed and low noise through KOSS ELISA, PRUSA I3, ULTMAKER, COREXY and other motors.Specifications: Number of phases: 2 Rated voltage: DC 3V Phase resistance (20 ° C): 2.0 x (1 ± 20%) Ω / phase Holding torque: ≥ 480mN.m Steering (shaft extension): A-ABB-clockwise Maximum no-load operating frequency: ≥ 1900PS Electrical strength: AC600V /1MA/IS Moment of inertia: 87.3g.cm2 Step angle: 1.8 ° ± 0.09 ° Phase rated current: Dc1.5A / phase Inductance: (IKHz) 4.9 x (1 ± 20%) m / phase Positioning torque: 20 mn.m REF. Maximum no-load starting frequency: ≥1600PPS Insulation resistance: ≥100MΩ (DC 500V) Insulation class: Class B Quality: 312g REFPackage List: 1 * Stepper Motor 1 * Connecting Cable

1、The speed is even and does not lose steps. 2、The PCB board is reinforced to the motor, and the unique stator technology is adopted to ensure that the stator teeth of the motor are evenly polished, the inner hole has high precision, and the rotation speed is stable and accurate during the working pr 3、The structure is stable and works smoothly. 4、The surface of the rotor of the motor is coated with imported epoxy resin to prevent the motor from generating noise due to burrs on the surface of the carbon steel after oxidative grinding. 5、The speed is stable and the noise is low.