Плиточный клей ATLAS PLUS 5 кг C2TE S1 высокоэластичный клеевой раствор

ATLAS PLUS 5kg C2TE S1 tile adhesive highly flexible adhesive mortar

5905400140910

Tile adhesive highly flexible deformable ATLAS PLUS 5kg

☑ Thanks to the high content of polymer compounds, cement adhesive obtains unique properties, making it a product with the highest technical and operational parameters, guaranteeing durability for many years.

☑ The presence of polymers ensures high adhesion of all types of cladding to each substrate, including the so-called. difficult and critical substrates. Thanks to the intertwining of the polymer network with the network of inorganic cement hydration bonds, the adhesive obtains exceptional parameters.

HIGHLY FLEXIBLE TILE ADHESIVE C2TE S1 ATLAS 5KG Original packaging condition

Advantages and features of the product

✅Durable and strong connection of the cladding with difficult and non-absorbent substrates,

✅Safety of use at temperatures already above 1 °C - thanks to binding accelerators, the use of the new ATLAS PLUS adhesive allows you to enter the cladding after 24 hours, even in the case of installation in insufficiently heated rooms in the autumn - spring

✅Can be used on substrates exposed to high deformation and vibration,

✅High resistance to extreme operating loads – mechanical and thermal,

✅Excellent adhesion to all types of cladding,

✅Safety of use for all tile formats, including tiles with an area of more than 5 m2,

✅Excellent working parameters and rheology.

Benefits

⭐Increasing strength parameters,

⭐Significant increase in resistance to high operating loads and impact loads and vibrations,

⭐Safety of installation at large temperature differences,

⭐Compensation of stresses arising on deforming substrates,

⭐Improvement of water retention in adhesive mortar: fibers limit the effects of rapid water extraction both at the connection with the absorbent substrate and with the absorbent plate and in the evaporation zone; during the bonding and drying of the adhesive mortar (especially applied in the maximum thickness), the fibers accumulate and transport water maintaining its equal level throughout the layer,

⭐Limitation of the effect of “pulling” the tile,

⭐Significant improvement of operating parameters,

⭐Increasing the stability of tiles immediately after they are glued to the substrate.

Properties

⚡Extended open time - allows you to apply the tile to the glue even 30 minutes from the moment of applying it to the substrate - you can apply it to a larger surface at once and thus significantly reduce the working time.

⚡Reduced runoff - allows you to stick tiles "from above" - the right consistency and thickness of the layer eliminate the runoff of glue. This allows you to start work from the top of the wall and avoid sticking cut tiles on its exposed surface.

⚡Universality of application – the adhesive is dedicated to virtually all types of cladding, regardless of the size of the tiles, on various substrates, in different types of objects, even under high operating loads of the cladding.

⚡Recommended for laying cladding in drinking water tanks, food industry, health care facilities, nurseries, kindergartens, etc.

Parameters:

Brand: Atlas

Capacity: 5 kg

Average consumption: 1,5 kg/m2

Adhesion: 0,5 N/mm2

Layer thickness: 2-10 mm

Properties: Fiber Reinforced

Application temperature: From +1 °C to +30 °C

Strength: 0,5 N/mm2

Drying time: 12h, entering the floor after 24h

Application: Tile Adhesive

Price is for one piece

ATL.KL.PL.05