ATLAS PLUS Клей для керамогранита и клинкера эластичный 5 кг

ATLAS PLUS | HIGHLY FLEXIBLE DEFORMABLE ADHESIVE, DOUBLE POWER FIBERS AND POLYMERS, 2 - 10 mm - type C2TE S1 | 5 KG

Key features:

• excellent bonding already at low temperatures
• ceramic tiles, stoneware, mosaic, stone, glass
• bathroom, kitchen, terrace, balcony, garage, stairs, swimming pool
• OSB, g-k boards, old tiles, waterproofing, lastrico, underfloor heating
• 3 x greater initial adhesion

Main parameters

• thickness of the layer used: 2 - 10 mm
• Application temperature: from +1 °C to +25 °C
• standby time: approx. 4 hours
• grouting: after 16 / 24 hours

Manufacturer: ATLAS

Weight: 5 kg

Consumption: Listed below

Main properties

ATLAS PLUS is produced in the form of a dry mixture of the highest quality cement binder, aggregates and specially selected modifying agents.

It is highly flexible – formability S1 – permissible deflection of hardened adhesive is in the range from 2,5 to 5 mm (test according to PN-EN 12002).

Has three times the initial adhesion, or ≥ 1,5 N/mm²

The thickness range of the adhesive layer (2-10 mm) allows for:

- thin-layer cladding on an even substrate,

- thin-layer cladding on uneven ground, preceded by leveling putty.

Extended open time - allows you to apply the tile to the glue for up to 30 minutes from the moment it is applied to the substrate - you can apply it to a larger surface at once and thus significantly reduce the working time.

Reduced runoff - allows you to stick tiles "from above" - the right consistency and thickness of the layer eliminate the runoff of glue. This allows you to start work from the top of the wall and avoid sticking cut tiles on its exposed surface.

Universality of use – the adhesive is dedicated to virtually all types of cladding, regardless of the size of the tiles, on various substrates, in different types of objects, even under high operating loads of the cladding.

Recommended for laying cladding in drinking water tanks, food industry, healthcare facilities, nurseries, kindergartens, etc.

There may be slight differences between the photo and the product in reality, while the properties always remain the same. Before using the product, it is absolutely necessary to read the label on the packaging and the manufacturer's technical card available on the manufacturer's website. Product consumption is indicative, may vary depending on the application, substrate absorbency or application method. Before applying the product, we recommend that you perform the test in an invisible place.