ATLAS GEOFLEX ULTRA КЛЕЙ ДЛЯ ГЛАЗУРИ 25 КГ

ATLAS GEOFLEX ULTRA

gel adhesive 2-15 mm, highly flexible, deformable, type C2TE S1

WEIGHT: bag 25 kg

• on the most difficult substrates
• for high-temperature operation
• consistency adapted to the needs
• maximum size of tiles: without restrictions

Main properties:

• formability S1
• on the most demanding substrates, including underfloor heating, G-K, OSB boards
• grouting possible after 12 hours
• no runoff even with large formats
• high stabilization of large format boards (even > 1 m2), laid on horizontal surfaces
• 3 in 1 putty/ gluing/ puttying and gluing
• ability to work at high temperatures of 5-35 degrees
• for small, medium, large and large formats
• available in modern foil packaging

Technical data:

• layer thickness: 2 - 15 mm
• use temperature: from +5 °C to +35 °C
• standby time: approx. 4 hours
• coupling: after 12 hours
• consumption for tiles 30 x 30 cm: from 2,0 kg/m2

The GEOFLEX ULTRA adhesive formula uses innovative silicate gel technology. Silicate gel has a unique ability to bind water. The gel fills the pores, formed at the stage of bonding the glue by a network of inorganic bonds. Accumulation of part of the commercial water ensures full hydration of cement, regardless of the type of cladding. Thanks to the appropriate water management, which is necessary to complete the bonding process, the gel adhesive guarantees full adhesion to substrates with varying degrees of absorbency. The use of silicate gel technology is a benefit in the form of:

• possibility of sticking cladding of any type, both absorbable and non-absorbable
• the possibility of optimal adjustment of the adhesive consistency to the individual preferences of the contractor and the needs resulting from a specific application, by dosing water in a much wider range than in the case of traditional adhesives
• obtaining a full flow of adhesive mortar under the plates, which improves the adhesion and durability of the fixation, especially in external applications of safe bonding of cladding on substrates exposed to direct sunlight, both during glazing work and during bonding of adhesive mortar (e.g. on balconies, terraces, etc. )

ATTENTION:

Information about hazards and dangers in accordance with Commission Regulation (EU) 2020/878 in the current version can be read in the safety data sheet that is attached to the offer.