Универсальный клей Atlas 25 кг OK!

ATLAS OK! elasticized adhesive 25 kg

TILE GLUE OK!

FLEXIBLE WITH FIBERS 25kg

ATLAS

Cement adhesive for tiles with increased parameters and greater mechanical strength.

Suitable inside and outside, both on the walls and on the floor.

BASIC FEATURES:

• frost-resistant
• waterproof
• layer thickness from 2 to 10mm
• Grouting after 12/24 hours
• Entrance to the floor after 24 hours
• full operating load after approx. 3 days
• maximum tile format 40 x 60 cm
• extended open time (the possibility of applying the tile to the glue even 30 minutes from the moment of applying it to the substrate - you can apply it to a larger surface at once and thus minimize the working time)
• reduced runoff (possibility of mounting ceramics “from above”, no need to stick cut tiles on the exposed surface)
• Application temperature: from +5 °C to +30 °C
• standby time: approx. 4 hours

Possibility of thin-layer sticking of cladding on uneven ground and possibility of leveling mineral substrates.

TYPES OF GLUED TILES:

• glaze
• terracotta
• porcelain stoneware
• clinker
• ceramic mosaic
• concrete/cement mortar tiles

DOUBLE FIBER TECHNOLOGY:

It is a mixture of polypropylene and cellulose fibers. Polypropylene fibers are a material with very high resistance to acids, bases, solvents and salts. They are hydrophobic, practically non-absorbable, and thus resistant to microbiological paralysis. These fibers improve the mechanical properties of the mortar by producing dispersed reinforcement in the mortar structure.