ATLAS ADHESIVE MORTAR ELASTICIZED универсальный клей типа C1TE(2-10 мм)5 кг

ATLAS ADHESIVE MORTAR

FLEXIBLE

Universal adhesive type C1TE (2-10 mm)

The most important features

• for ceramic tiles, including mosaics and stoneware
• for small and medium format tiles
• for kitchens, bathrooms, hallways, laundry rooms, garages
• allows you to stick tiles from the top of the wall
• extended open time

Main properties

ATLAS FLEXIBLE ADHESIVE MORTAR is a mixture of the highest quality cement binder, aggregates and a special composition of modifying agents, including polymers. The refined formula ensures that the product obtains the highest technical parameters in its class and is widely used in residential construction:

• wide range of thickness of the applied adhesive layer (2-10 mm) and thus allows thin-layer cladding also on uneven ground and allows leveling of mineral substrates,
• extended open time - allows you to apply the tile to the glue for up to 30 minutes from the moment of applying it to the substrate - you can apply it to a larger surface at once and thus minimize the working time,
• reduced runoff, thanks to which it is possible to install ceramics "from above" and avoid sticking cut tiles on the exposed surface,
• a wide range of applications in residential construction: bathrooms, kitchens, hallways, garages, staircases, walls and floors.

Main parameters

• thickness of the layer used: 2 - 10 mm
• standby time: approx. 4 hours
• grouting: after 24 hours

Improving the working parameters of the adhesive makes working with mortar easy and pleasant. Enrichment of the adhesive with elasticizing additives means that at every stage of work it meets the expectations of the tiler.

Mixing. The adhesive is less susceptible to aeration and forms a homogeneous mixture – homogeneous in terms of distribution of components in the whole prepared mass. This property, supported by the perfect selection of the aggregate stack, provides the adhesive layer with the highest strength.

Applying to the trowel. The adhesive has an optimally selected viscosity, guaranteeing that it is transferred without losses from the trowel container and from the trowel to the substrate.

Application to the ground. The adhesive spreads perfectly over the surface - the adhesion forces of the mortar are so large that they prevent the glue from "wrap" on the trowel (with a properly primed substrate).

Sticking the tile. Perfectly selected viscosity allows easier operation of the glued tile.