Набор игл для шитья кожи крючком своими руками

Function:

1. DIY hand sewing device, using high-quality beech wood metal materials, durable and wear-resistant.

2. The needle can be freely removed and replaced, suitable for DIY leather sewing.

3. Built-in thread spool design, smooth threading, reasonable adhesion of wax thread without tangling.

4. Leather sewing tool, suitable for repairing tents, backpacks, sleeping bags, saddles, seat belts, etc.

5. Built-in spool, prevents the thread from scratching and breaking, the thread thickness is about 0.6mm, recommended to replace the wax thread with a thickness of 0.6mm or more.

Specification:

• Condition: 100% Brand New
• Item Type: Sewing Awl
• Material: beech wood metal
• Weight: approx. 81g-107g / 2.9oz-3.8oz
• Installation

1. Remove the 2 conical needles

2. Install the conical needle

3. Pass the thread through the conical hole

4. Install the head

5. The thread length is slightly longer than the seam length

6. The tapered needle is passed through the front of the skin

7. Pull out the thread while pulling the tapered needle back

8. The conical needle passes through the second hole

9. Pass the cable through the hole shown in the picture

10. Tighten the thread at one end and pull out the tapered needle at the same time

11. As shown on the back

12. Continue threading as shown in the illustration

• How to use

1. First, disassemble the sewing tool

2. After splitting

3. Thread the needle upside down

4. After threading, the needle is pulled out from above

5. Install the spool

6. Finalize

• Stitches:

1. Go straight

2. Pull out the line

3. Through the second hole

4. Note the threading, go here

5. Pull the needle out of the puncture position

6. Tighten both sides at the same time

7. Repeat the above 6 steps, the end result is as shown above

Package List:

• 1 x Sewing Awl
• 2 x straight needle
• 1 x small wrench
• 1 x Manual
• or
• 1 x Sewing Awl
• 1 x straight needle
• 1 x elbow needle
• 1 x fixing screw
• 1 x Manual