Электронный регулятор температуры XY-T01, 2 шт., модуль управления от -50°С до

2Pcs XY-T01 Electronic Temperature Controller, Control Module -50Celsius to 100Celsius Temperature Control Switch Boards Product features: the electronic thermostat power supply is DC 6-30V or 5V micro-USB, the control load current is 10A (max), the test temperature is from -50 to 110Celsius, the temperature control accuracy is 0.1 Celsius, the refresh rate is 0.5 seconds, and the sensor length is 0.5 metersProduct function: this digital temperature control module has heating mode ("H") and cooling mode ("C"), with the function of high temperature alarm ("ALA"), delayed start ("OPH"), temperature correction function -10.0~10.0Celsius ("OFE" ), remote parameter reading/setting, real-time temperature report and more2 Working modes: this electronic temperature controller has 2 working modes, heating mode (start temperature is lower than stop temperature) and cooling mode (start temperature is higher than stop temperature), range from -50Celsius to 110Celsius; The high temperature control accuracy reaches 0.1CelsiusWaterproof probe: XY-T01 electronic thermostat is equipped with a 0.5-meter NTC10K probe, which is made of stainless steel, is waterproof and not easy to rust, easy to use and can last for a long timeUse for: the electronic thermostat can be widely applied in intelligent home and industrial equipment, suitable for household appliances, office machines, audio, automobiles, etc.Working mode/setting temperature/return temperature setting:1. In the running interface, short press the "set" key to enter the quick setting interface;2. After entering the quick setting interface, short press the "set" key to switch the parameters you want to set (work mode/set temperature/return temperature);3. Use the "up" "down" key to modify the parameter value, and they support short press/long press;4. Press and hold the "set" button for more than 3 seconds or without any button operation for 6 seconds , it will save the parameters and automatically exit the quick setting interface.Set ALA/OPH/OFE (alarm temperature /delay starting setting/temperature correction):1. In the running interface, long p