2,8-дюймовый антенный анализатор 50 кГц~900 МГц

Function:

1. The analyzer measuring frequency is from 50Khz ~ 900MHz.

2. The RF output of the analyzer is -13 dbm and down to -9 dbm.

3. It is a shortwave analyzer for the NanoVNA network antenna.

4. Equipped with 2.8 inch TFT display for clear display, USB and Type-C.

5. Suitable for measuring S parameters, VSWR, phase, delay, Smith chart.

Specification:

Item type: vector antenna shortwave analyzer

PCB size: 55 x 86 x 12mm / 2.17 x 3.39 x 0.47in (not including connector and switch)

Measurement frequency: 50Khz ~ 900Mhz;

RF output: -13dbm (-9dbm maximum)

Measurement range: 70dB (50kHz-300MHz), 60dB (300M-600MHz), 50dB (600M-900MHz) with extended software enabled)

Port SWR: <1.1

Display: 2.8 inch TFT (320 x 240)

USB interface: type C

Communication mode: CDC (serial)

Power supply: USB 5V 120mA, built-in 600mAh battery, maximum charging current 0.8A

Number of scan points: 101 (fixed)

Display Tracking: 4, Marking: 4, Setting Saving: 5

Package List:

1 x analyzer, 1 x USB cable, 2 x connecting cable, 3 x yellow connector, 1 x silver connector