ДАТЧИК ТЕМПЕРАТУРЫ SONOFF Wi-Fi DS18B20 2x3mb

SONOFF BASIC Wifi

TEMPERATURE SENSOR DS18B20 - 2 pcs, cable length 3mb

Ebook - with it you can easily configure your device with the SUPLA System

Stripping bands "tritiques" to attach the temperature sensor, e.g. on the pipe.

• Sonoff Basic WiFi
• Waterproof temperature sensor DS18B20
• Preloaded Software: Supla
• Number of Temperature Sensors: 2 pcs
• Sensor Cable Length: 3mb

The device has built-in and CONNECTED TEMPERATURE sensors DS18B20 on a cable with a length of : 3mb

The preloaded soft is complete and configured under the appropriate amount of sensor installed in the device.

With the product you purchase, you get an ebook!!

You will find a lot of valuable advice, including:

• How to add Sonoff Basic to SUPLA systems using the app on your phone.
• How to add Sonoff Basic to SUPLA systems using the website on your computer.
• how to configure the temperature in the device to work without access to the Internet
• Links to official websites with valuable tips and videos

E-books are constantly updated and new topics and advice are added!!

The device has preloaded Soft after cooperation with the SUPLA system. ALWAYS UPLOADING THE LATEST VERSION OF THE SOFTWARE.

The preloaded soft is complete and configured under the appropriate amount of sensor installed in the device.

PRELOADED SOFTWARE IN POLISH

The device with our SUPLA software can work as a thermostat even WITHOUT INTERNET ACCESS. In the absence of internet or signal loss - your device will still work.

Example : SWITCHING ON THE RELAY at 20 degrees . TURN OFF THE RELAY at 30 degrees.

In our ebook you get a description of how to make this configuration.

Features of the device:

The device is equipped with the latest SUPLA software, allowing you to control the temperature in real time from the mounted DS18B20 temperature sensors.

The device also has an additional output to which a voltage of 230V is given, described as Output on the housing. This allows us to control the device connected to Sonoff Basic. This device can be controlled from the application or the button located on the Sonoff Basic housing.

The most important features of the SUPLA application:

SUPLA is a project developed on the principles of open software and open hardware that allows you to build a simple building automation system and allows you to control the equipment of your home or business.

With Supla, you can control:

• lighting;
• Electrical equipment;
• Entry gate/garage gate/gate with notification of their open/closed condition;
• blinds;
• Irrigation of the garden;
• Heating system;
• Emergency installation;
• Valves.

In the app, you can check the history of temperature measurements at different times. You can control the connected device from any corner of the world - all you need is an Internet connection.

In your SUPLA account, you can change device names, thermometer names.

It is possible to set schedules so that you can plan the day and time of operation of the devices.

In a word, anything to build a simple smart home system

Sonoff Basic specification:

• Voltage Range: 90-250V AC (50/60Hz)
• Maximum Current: 10A
• Maximum power: 2200 W
• Dimensions 88 * 38 * 23 mm (L x W x H)
• Colour white
• Humidity: 5%-90% RH, non-condensing
• WiFi Frequency: 2,4 GHz
• Operating temperature: 0 o C-40 ° C (32 ° F-104 ° F)

DS18B20 Sensor Specifications:

• Operating voltage: 3 - 5,5V
• Measured temperature: -55°C - 125°C
• Accuracy: 0,5°C
• Interface: 1-Wire
• Housing stainless steel , waterproof

Before purchasing a product with SUPLA software, please familiarize yourself with its capabilities.

Extending the cable from the temperature sensor results in loss of warranty.

Device after software changes - not certified. The device may be used for private purposes only.